Fitting looks simple, but it's where a lot of tyre problems start. A bead that isn't seated evenly causes a wobble that no amount of balancing fixes. A directional tyre mounted the wrong way loses wet grip. A TPMS sensor snapped during removal costs more than the fitting itself. We take the time to do each step properly.
Plenty of customers buy tyres online or from a dealer and only need someone to put them on. That's fine with us. Tell us the tyre model and size, and we'll bring the right tools for it, whether it's a 15-inch hatchback tyre or a 22-inch low-profile tyre on a Range Rover.
What a proper fitting includes
Every tyre change and fitting job follows the same sequence. Skipping any of these is how wheels end up vibrating, leaking slowly or being damaged.
- Break the bead and demount the old tyre without touching the rim face
- Clean the rim's bead seat, where old rubber and corrosion cause slow leaks
- Fit a new rubber valve, or new seals and a core on a TPMS valve
- Lubricate the bead and mount the tyre in the correct direction or orientation
- Seat the bead evenly, checking the moulded line around the rim
- Balance, refit, torque in a star pattern and set pressures
Directional, asymmetric and staggered tyres
Many modern tyres can only go on one way. Getting it wrong doesn't always feel obvious at first, but it changes how the tread clears water and how the tyre behaves in a corner. We check the sidewall markings on every tyre before it goes on.
| Marking | What it means | How we fit it |
|---|---|---|
| Arrow and the word ROTATION | Directional tread | Arrow points forward when the car moves |
| OUTSIDE / INSIDE | Asymmetric tread | OUTSIDE faces away from the car |
| Different sizes front and rear | Staggered fitment | Wider tyres stay on the rear axle only |
| Star, MO, AO, N0 marks | Car maker approved | Match the mark you already run where possible |
Fitting tyres you bought elsewhere
If you've ordered tyres online or from a dealer, we can collect them or meet them at your address. Before fitting, we check the size, load index and speed rating against your door placard, and read the DOT code so you know how old the tyres are. If the tyres don't match your car, we tell you before we mount them, because once they're fitted most sellers won't take them back.
Not sure how to read those codes yourself? Our guide on reading tyre size and the DOT code walks through it. If you'd rather we supply the tyres, see buying tyres online with fitting.
Wheel nut torque and why we use a torque wrench
Impact guns are fast but they over-tighten nuts, which can stretch studs and warp brake discs. Under-tightened nuts are worse. We run nuts down by hand, then finish with a torque wrench to your car's figure.
| Vehicle type | Typical torque range (check your handbook) |
|---|---|
| Small saloons and hatchbacks | Around 100–110 Nm |
| Mid-size saloons and crossovers | Around 110–140 Nm |
| Large SUVs and pickups | Around 140–210 Nm |
TPMS sensors and low-profile wheels
Most cars sold in the UAE in the last decade have direct TPMS sensors inside the wheel. They sit right where the tyre machine's head works, so we position the bead break away from the valve and mount carefully. After fitting we check that every sensor reports, and if a sensor is dead or corroded we can replace it through our TPMS sensor service.
Tyres with a 35-profile or lower, and run-flats with stiff sidewalls, need a machine with a helper arm. Ours has one, so low-profile tyres on cars like the Mercedes-Benz E-Class or Range Rover Sport are fitted without forcing the bead over the rim.
After fitting: balancing and alignment
A new tyre is never perfectly uniform, so we balance every wheel we fit. Alignment is a separate job: it isn't needed every time, but if your old tyres wore on one edge, the new ones will too. In that case book a wheel alignment within a few days. We fit tyres across Dubai, Sharjah and Abu Dhabi at the same rates, with only travel time differing.
Frequently asked questions
How much is tyre fitting in Dubai?
Our tyre fitting starts from AED 35 per tyre. Balancing is from AED 25 per wheel. The price goes up for large SUV wheels, run-flats and very low-profile tyres, and there is a callout charge for mobile visits unless it's waived with a tyre purchase.
Will you fit tyres I bought online?
Yes. We fit tyres from any seller. We check size, load index, speed rating and the DOT date before mounting, so you know they're right for your car.
Do new tyres need balancing?
Yes. Every new tyre and wheel combination has small weight differences, and without balancing you'll usually feel a vibration at highway speeds. We balance every tyre we fit.
Can you fit run-flat tyres?
Yes. Our machines have a helper arm for stiff run-flat sidewalls, and we take care around TPMS sensors, which almost every run-flat car uses.
How long does it take to fit four tyres?
Around 45–60 minutes on site for four tyres with balancing. Larger SUV wheels or seized wheel nuts can add time.
Do I need an alignment after fitting new tyres?
Not always. If your old tyres wore evenly, alignment is optional. If they wore more on one edge, get the alignment checked so the new tyres don't wear the same way.
Related pages
- ServiceTyre Change & Fitting
- ServiceWheel Balancing
- ServiceTPMS Sensor Service
- ServiceWheel Alignment
- GuideBuy Tyres Online Dubai
- GuideTyre Delivery & Fitting Dubai
- GuideRun-Flat Tyre Replacement Dubai
- Tyre typePerformance (UHP) Tyres
- Tyre typeRun-Flat Tyres
- Tyre typeTouring Tyres
- BrandMichelin tyres
- BrandPirelli tyres
- BrandContinental tyres
- ArticleHow to Read Your Tyre Size and DOT Code
- Article7 Signs You Need a Wheel Alignment
- ArticleTPMS Warning Light: What It Means and What to Do
Stuck with a puncture right now?
Send your location on WhatsApp. A technician confirms the price and heads out, usually within 30–45 minutes in central Dubai.
